📄️ Powering the Board
The Input1 has a Barrel Jack for power and can handle 5v-24v, whatever you use for this will be used to power the LAMP so don't choose anything too large!
📄️ Installing the firmware
When your controller arrives it will be in a 'sleeping state' you just need to plug it into your network and head to http://baldrickinput.local (if your DNS doesn't accept that then just look for it on your network)
📄️ Wire it up!
It's time to wire up the input, in this example we are going to use a button but the Input1 will work with many different types of sensors.
📄️ Setup the action!
Button Wiring